Key Features:

• Smooth rolling wheels make this stand studio mobile
• Low to high adjustment allows for waist level to overhead support
• Collapsible legs for quick and easy storage and transportation
• Stable, sturdy base provides confident mounting of Tether Tables, monitors, lights, and other gear

The Low Boy Roller pairs perfectly with a Tether Table Aero to create the ultimate rolling laptop stand that is indispensable for tethered shooting. Incredibly smooth rolling, and just the right height, the roller stand works great in studio and on location.

Raise the two spring-loaded risers to a max height of 5′11″ (1.8m) and mount a monitor using a Rock Solid VESA Monitor Mount, tablets using an X Lock Case or AeroTab, as well as strobes, studio lights, and other gear on the 5/8″ knurled baby stud, then lock everything down using the large, ergonomically-designed grip knobs. Cushioned rubber rings on the risers safeguard your gear from unnecessary bumps and vibration, and the optimal wingspan on the base and locking wheels ensure that this stand will remain stable and upright.

Folding legs with locking pins allow for the Low Boy Roller to be setup or folded down in seconds. Featuring all-metal construction and the highest quality manufacturing.

Key Features:

• Universal mount to nearly any power strip or surge protector
• Female 1/4″-20 thread and 5/8″ baby stud for easy mounting
• Attaches via the Rock Solid Master Clamp, sold separately
• All-metal construction

This solution enables photographers, videographers, and creatives to create an organized, safe, and efficient workstation. Works with any surge protector or power strip that has mounting holes on the back of the strip.

Use the Aero PowerMount to secure power strips and surge protectors to: poles, tripod legs, video carts, tables, workbenches, trusses, and more.

The Aero PowerMount features a female 1/4″-20 thread and 5/8″ baby stud with an anti-rotation flat to ensure a secure connection. Combine with any grip gear that has a male 1/4″-20 thread or female baby stud receptor like a Master Clamp, EasyGrip, or VersaClamp.

The Rock Solid 4-Head Tripod Cross Bar with 4 heads mounts to a tripod center column 3/8″ thread. It can also mount to a lightstand using a Rock Solid Baby Ballhead Adapter.

The Rock Solid 4-Head Tripod Cross Bar mounts securely to a tripod with dual-locking heads and features knurled plates for quick and easy mounting of your gear. The versatile Rock Solid 4-Head Tripod Cross Bar features 4 – 3/8″ threads that allow flexibility in mounting a variety of gear including single or multiple cameras, Tether Tables, iPads, tablets, other arms or accessories. The possibilities are endless. Mount your Tether Table Aero on one head and camera on a Ballhead on the other; mount your camera and a tablet; or Tether Table Aero and a tablet.

Add a Rock Solid 2-Head Cross Bar Side Arm to the 3/8″ screw on either end of the Rock Solid 4-Head Tripod Cross Bar to create the Tether “T” setup, the vertical bar provides a height variable solution that is perfect for step and repeat photographers.

Transport and protect your Rock Solid Tripod Cross Bar with the included custom-designed travel/storage case.

The Tether “T” design allows the computer to remain at a constant height, secured on the Rock Solid Tripod Cross Bar, while the Rock Solid Cross Bar Side Arm provides a height variable solution that is perfect for step and repeat photographers.

The Rock Solid 2-Head Cross Bar Side Arm mounts securely to the Rock Solid 4-Head Tripod Cross Bar via the 3/8″ threads at the end and features knurled plates for quick and easy mounting. The double locking ratchet knobs keep the Arm secure at the optimal height for your subject.

Ideal for step and repeat photo shoots, simply adjust the vertical bar to the appropriate levels as subjects enter and exit the frame. The arm provides 24″ of vertical movement covering just about any situation.

The Tether “T” design is quick and easy to use and takes a couple of minutes to set up. The Arm stores compactly using the custom designed travel bag for easy transport and storage.

To create the Tether “T” setup pictured, the Rock Solid Tripod Cross Bar is also needed. All other items pictured are also sold separately.

Key Features:

• Mount a tripod ball head or cross bar on any photography light stand or c-stand
• Convert any Baby 5/8″(16mm) stud or Junior 1-1/8″ receiver into a 3/8″ thread

The Rock Solid Baby Ballhead Adapter allows the mounting of any ball head or gear with a female 3/8″ to any Baby 5/8″ (16mm) or Junior 1-1/8″ hardware such as light stands, arms or clamps with studs. The adapter is all aluminum and features a large ergonomic handle.

*Listing is for the Rock Solid Baby Ballhead Adapter only. All other items pictured sold separately.

Key Features:

• Fits most tripods
• All-metal locking casters
• Fully collapsible legs
• Built-in handle for easy transport

The Rock Solid Tripod Roller gives wheels to most any tripod and offers mobility for Tether Table Aero System, monitors, tablets, cameras, and other production gear. Its universal foot attachments securely hold most tripods. The extendable leg bases feature easy-to-turn knurled tightening knobs to quickly secure each tripod leg in the roller. Once secured, the tripod is easy to level and adjust. Simply loosen the dolly extensions and spread to the exact desired tripod height. Lock the dolly legs in place and tighten each tripod leg. The legs lock in place when extended for extra security.

Each leg has large 3″(7.62cm) rubber-cushioned glide wheels with foot locks. The larger wheels and dense rubber make for smooth rolling motion and less impact from bumps or uneven floors. Easy foot locks on each wheel make it simple to secure in place and the locks release with a tap of the toe.

With typical tripods, the height of the tripod head can range from 34.25″ to 46.5″ from the floor. All ranges in between can be achieved. Height dependent on tripod leg, neck, and ballhead/panhandle.

The Rock Solid Tripod Roller folds very compactly and is easy to carry with its built-in handle. The included travel storage case has an adjustable shoulder strap for transport.

A fastener strap is included for additional security when transporting.

The Dual Wing Sand Bag is made of durable black Cordura nylon and has two separate compartments. The bag is built rugged and double stitched for increased strength.

The dual wing sand bag is saddle style so it can be draped over a stand leg or boom, hung from a tripod with the included D ring, or hung from a J-Hook by the strap handle.

Tether Tools Dual Wing Sand Bag is perfect for securing bases of light stands, tripods or set walls and backdrops. The saddlebag design is also ideal for securely nesting a camera and lens between the 2 compartments for low to the ground shots or working with unusual terrain. The attached strap handle is for easy positioned, carrying and hanging.

The sand bag ships empty for convenience and economy and will hold up to 25lbs (11.4kg) of sand, shot or any weighted material. It can also be emptied for easy storage or transport.

The Rock Solid Dual 5/8″(16mm) Baby Stud is a handy and indispensable universal adapter which converts just about any piece of photography equipment into the mount required for the current situation. Always having a few of these readily available in a grip bag can be a lifesaver.

The Rock Solid Dual 5/8″ (16mm) Baby Stud features a Baby 5/8″(16mm) stud on both sides and a 1/4″-20 male thread on one end and a 3/8″-16 thread on the other. All steel construction, both round studs fit into any 5/8″(16mm) Baby receiver. This handy adapter will also convert any 3/8” female or 5/8” (16mm) Baby stud receptor to a 5/8” pin or ¼”-20 male thread. It will also convert any ¼”-20 female to a 5/8” (16mm) baby stud receptor to a 5/8” (16mm) pin or 3/8” male thread.

Rock Solid Dual 5/8″(16mm) Baby Stud was designed to fully integrate with the complete line of Tether Tools Rock Solid clamps, stands, and accessories.

The Rock Solid Camera Platform is designed to integrate with any 5/8″(16mm) Baby studio stand, clamp or arm. This versatile bracket quickly and securely mounts to any standard 5/8″(16mm) Baby stud.

Included with the camera platform is a 1/4″-20 screw with a large knob to secure the camera and two 5/8” baby stud receptors for variable accessory mounting. Ideal for mounting a camera or other 1/4″-20 accessories in various locations. Also includes an umbrella mounting receptor. Looking to mount a GoPro camera? Add a Rock Solid Tripod Mount for GoPro Hero®.

The Tether Tools Tether “T” set up bundles the Rock Solid 4-Head Tripod Cross Bar with the Rock Solid 2-Head Cross Bar Side Arm allowing for adjustments to your camera without the need to raise or lower your computer. Move your camera independently.

Combine the 2 tripod accessory arms to create the Tether “T” setup enabling easy adjustments to the camera’s height while keeping your Tether Table Aero (sold separately) and computer stationary.

The Tether “T” mounts to a tripod leg’s 3/8″ screw and allows the computer to remain at a constant height as adjustments are made to the camera’s horizontal plane. Want to mount the Tether “T” to a stand? A ballhead adapter is needed.

Ideal for step and repeat photo shoots, simply adjust the vertical bar to the appropriate levels as subjects enter and exit the frame. The 2 head arm provides 23.6″(60cm) of horizontal movement covering just about any situation.

Mount the vertical arm on either end of the 4 head horizontal arm for added versatility. The arm features 3/8″ threads on both ends for tripod head mounting.

Design is quick and easy to use and only takes a couple of minutes to set-up. Stores compactly and fits nicely into our custom designed travel/storage bag for easy transport and storage.

Accessory Arms shown with the tripod, ballhead & Tether Table Aero (all sold separately).

*Listing is for the Rock Solid 4-Head Tripod Cross Bar and Rock Solid 2-Head Cross Bar Side Arm bundle only. All other items pictured are sold separately.