The Relay Camera Coupler combined with the Case Relay Camera Power System provides constant, uninterruptable power for your camera and is perfect for time-lapse photography, photo booths, video production and power-hungry LiveView shooting or any long day on the set. Need more power? Hot swap in another power bank and continue shooting while never losing power to your camera.

How Does it Work?

Simply insert the Relay Camera Coupler directly into the camera battery port, attach it to the Case Relay CPS and power your camera with the included Rock Solid External Battery Pack or an AC power source using an USB to AC wall adapter or use the ONsite D-Tap Battery with V-Mount. Because Case Relay also has its own secondary internal 1200 mAh battery, if your external battery runs low you can easily hot swap the external battery and not lose power to the camera.

• Insert Relay Camera Coupler into camera battery cavity
• Completely close battery door allowing coupler cable to exit through the rubber trapdoor
• Battery door must be completely closed for the Case Relay Camera Power System to properly function

Relay Camera Coupler & Relay CPS Benefits:

• More cost effective than purchasing multiple proprietary camera batteries
• Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
• Never need to charge camera batteries again. And never run out power.
• Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
• A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.

The Rock Solid 3” Mini Articulating Arm is designed to hold a variety of devices including cameras, strobes, flashes, phones, iPads, tablets, camcorders, binoculars, or other accessories with a 1/4-20” female thread solidly in place.

The fully articulating arm provides increased adjustability, and attaches to any device with a 1/4”-20 mounting screw or female thread.  One simple adjustment knob allows for quick and accurate multi-directional control. Included lock-nut converts one end to a female 1/4”-20 thread and the arm positions the attached fixture (up to 2.5 lbs.) at any angle.

The Rock Solid 3” Mini Articulating Arm comes with the Tether Tools Lifetime Warranty.

The 5/8″ Baby stud can be threaded onto light stands, articulating arms, tripod, etc, that would benefit from having a 5/8″ top stud.

The Rock Solid Dual 5/8″(16mm) Baby Stud is a handy and indispensable universal adapter which converts just about any piece of photography equipment into the mount required for the current situation. Always having a few of these readily available in a grip bag can be a lifesaver.

The Rock Solid Dual 5/8″ (16mm) Baby Stud features a Baby 5/8″(16mm) stud on both sides and a 1/4″-20 male thread on one end and a 3/8″-16 thread on the other. All steel construction, both round studs fit into any 5/8″(16mm) Baby receiver. This handy adapter will also convert any 3/8” female or 5/8” (16mm) Baby stud receptor to a 5/8” pin or ¼”-20 male thread. It will also convert any ¼”-20 female to a 5/8” (16mm) baby stud receptor to a 5/8” (16mm) pin or 3/8” male thread.

Rock Solid Dual 5/8″(16mm) Baby Stud was designed to fully integrate with the complete line of Tether Tools Rock Solid clamps, stands, and accessories.

The RapidMount Extension Bar 8″ (200mm) allows the mounting of multiple pieces of photography or video accessories (Case Air, microphones, recorders, transmitters, Look Lock, lights, flashes, etc.) to a camera’s hot shoe or arm in a secure, convenient, and compact manner.

The RapidMount Extension Bar features a cold shoe channel for multiple accessories as well as three (3) 1/4″-20 female threads for mounting options and versatility. Perfect for mounting a flash or trigger to your camera’s hot shoe. Or, attach any device with a male 1/4″-20 thread, such as the TetherGuard Thread Mount Support to secure cables and protect ports.

The rail connects any camera’s hot shoe with the included double locking hot shoe adapter or position the extension bar on any 1/4″-20 compatible piece of grip gear including the Rock Solid Articulating Arm, EasyGrip, or light stand.

The included removable hot shoe adapter has double locking nuts so the bar can be rotated to any position and secured.

*Listing includes 8″ Extension Bar & cold shoe for use in the camera’s hot shoe. All other items pictured sold separately.

The Rock Solid Mini ProClamp is a versatile tool designed to mount iPads, tablets, phones, wireless devices, or cameras to an array of round or flat surfaces such as tripod legs, stands, rails for DSLR, and video rigs, as well as exercise bikes, treadmills, bicycle handlebars or more. The clamp can be attached to just about any surface within a .5″ (13mm) to 2.0″ (50mm) range.

The Rock Solid Mini-ProClamp is made entirely of lightweight aluminum and can secure items up to 8.8lbs (4.0kg). The built-in 1/4″-20 and 3/8″ receptor sockets allow for dozens of attachments to arms, brackets and other accessories.

The Rock Solid 7″ and 11″ Articulating Arms are designed to hold a variety of devices including iPads, tablets, phones, and other lightweight fixtures solidly in place. Easy to adjust and maneuver, simply turn the single knob to release all of the articulating joints and adjust to the new desired position or angle.

The sturdy elbow design features a locking lever control at the pivot. The arm includes two fully articulating joints at both ends and will hold any fixture up to 4.5 lbs. The 1/4″-20 male threads on both ends of the arm enable a connection to any device with a 1/4″-20 female receptor.

Both the 7″ and 11″ articulating arms are sold with a removable hot shoe adapter for camera mounting. Constructed entirely of aerospace aluminum, the Rock Solid Articulating Arm comes with the Tether Tools Lifetime Warranty.